All Products

Used PDC cutter inserts for stone cutting

Used PDC cutter is remove from the imported PDC drill bit mainly from USA PDC bit. Round and PDC without wear out can be used to weld on PDC drill bit as the cutting teeth, and they also can be used to cut small pieces to weld on a stone cutting saw...

Scrap PDC cutters 1308 for stone cutting

Scrap PDC cutter belong to unqualified PDC cutter when producing, they are made by tungsten carbide substrate and diamond powder. Even though they are unqualified PDC cutter but still have diamond layer and they are widely used in India market for...

T38 shank adapter for Sandvik

Shank adapter is made by quality carbon steel to produce with carburization proces with heat treatment. Adopt special CNC machine and process to produce to guarantee the shank adaptor tail, inside water hole and side water hole quality. Shank...

AQ diamond core bit for geological drilling

AQ impregnated diamond core bit is the smalles wireline double tube core barrel use diamond bit. It adopts diamond grain and steel to produce. When drilling the diamond grain will keep to exposed. Impregnated core bit is suit for kinds of formation...

4 blades 6 inch PDC bit for drilling

Product description 4 wings PDC bit is made by 1308 PDC cutters and steel with forging process, they are widely used in hole drilling in ming and water well drilling, dam construction and water conservany etc. Compared with 3 wings PDC bit, 4 blades...

32 34 36 38 40mm drilling button bit

Product descripation of drilling button bits Packaging and shipping of taper button bits Packaging for the 32 34 36 38 40mm taper button drill bit is in the wooden box or plastic box, 50 pieces are packed in one box; Samples will be sent by express,...

3 7/8 HQ3 diamond bit for well drilling

HQ3 diamond core bit is made with diamond and steel with forging process, HQ3 bit mainly use for broken formation drilling. Our company has manufacture impregnated diamond core bit since 2010, because of the high quality raw material and mature...

Tungsten copper welding rod carbide stick

Product description of carbide copper welding rod Packaging and shipping Packaging for the Tungsten copper welding rod carbide stick is in the carton box; Samples will be shipped by express, batch products will be shipped by air or by sea; Available...

Split tubes for wirelin triple tube core barrel

Product description of split tube Wireline triple tube core barrels are generally required in broken formation and fractured formations. They incorporate a third, split inner tube on base of wireline double tube core barrel. Thus can be pumped out...

150mm impregnated diamond bit for well drilling

Impregnated diamond core bit is made with diamond and steel with forging process. Our company has manufacture impregnated diamond core bit for single tube core barrel and double tube core barrel since 2010, because of the high quality raw material...

4 7/8 PQ diamond bit for Drilling tools

PQ diamon bit is made with diamond and steel with forging process. Our company has manufacture impregnated diamond core bit since 2010, because of the high quality raw material and mature producing process we use, our diamond core bit is widely used...

3 blades 5 inch carbide drag bit

Product description Female thread carbide drag bit is made by steel and carbide tips, it is mainly use for soft formation drilling in mining and water well drilling, it is lower cost and good perfance in soft formation drilling. We supply female...

HQ tsp core bit for well drilling

Product description TSP（TSD） core bit is short of thermally stabled diamond bit, TSP core bit is used for fast penetration in soft/medium rock formations. TSP’s are a cost effective alternative for large stone surface set and PCD bits, except for...

HMLC TSP TSD bit for sample coring

Product description TSP（TSD） core bit is short of thermally stabled diamond bit, TSP core bit is used for fast penetration in soft/medium rock formations. TSP’s are a cost effective alternative for large stone surface set and PCD bits, except for...

Drill pipe joint adapter 50mm thread

Product description Drill pipe joint adapter is made by carbon steel with maching process and heating treatment, it is using to connect drill rods, or connect drill bit with drill rods if the thread can not match. We can supply drill pipe joint...

6 inch carbide drag bits for well drilling

Product description Female thread carbide drag bit is made by steel and carbide tips, it is mainly use for soft formation drilling in mining and water well drilling, it is lower cost and good perfance in soft formation drilling. We supply female...

Jack hammer YT27 Air leg rock drill

YT27 air leg rock drill is a kind of high efficiency air leg rock drill machine. It is mainly used for blasting holes and other drilling works in a quarries, railway construction, water conservancy construction and national defence project facility....

Elctroplated diamond bit 6 inch for well drilling

Product description Electroplated Diamond Core Bit is the least expensive diamond core bit. It is similar with Impregnated diamond Core Bit, its cutting media is synthetic diamond, but its manufacturing process is electroplating synthetic diamonds...

Weld on DT50 reamer teeth HDD drilling Bits

DT50, DT87, RT1, RT2, BR1, BR2, BR3, BR4 is made by tungsten carbide tips and steel with forging process. They are design to drill hard rock and concrete for HDD (Horizontal directional drilling) machine. We can supply the HDD teeth size match for...

Weld on auger teeth RT2 for HDD machine

DT50, DT87, RT1, RT2, BR1, BR2, BR3, BR4 is made by tungsten carbide tips and steel with forging process. They are design to drill hard rock and concrete for HDD (Horizontal directional drilling) machine. Except for trencher cutting tools, we also...

1.5mm 2mm diameter 49% Silver Solder Wire

Silver solders are use to weld PDC cutters to the drill bit body under high temperature. We can supply different contents solders for different usage. except for silver solders, we also supply PDC drill bit, diamond core bit, drill pipe and related...

3- way toolholders with preset contact angies

Road milling teeth holder is produced by 42CrMo with forging process. We supply weld on tool holder to cut asphalt and concrete road, milling width from 0.5m-2m. Suitable for Wirtgen and Dynapac, Cat and Kennametal machine etc road milling machine....

Thread button bit t45 diameter 76mm for minery

Product description Thread button bit adopts quality raw material and advance mature process to produce, professional workers combine the quality material makes our thread button bit widely used in mining, rock drilling and tunnel boring work....

Carbide tips T110 T105 T107 for mining bits

T110 T105 T107 octagonal prisms carbide tips adopt 100% virgin raw materials to producewith precision ground and high polishing process to produce. They have high wear resistance and hardness and impact toughness. We own the professional advanced...